Desired format of the response. Possible value: png.

• string

One of the Azure Maps keys provided from an Azure Map Account. Please refer to this article for details on how to manage authentication.

• string

Version number of Azure Maps API. Current version is 1.0

Map layer requested. If layer is set to labels or hybrid, the format should be png.

Map style to be returned. Possible values are main and dark.

• integer

Desired zoom level of the map. Zoom value must be in the range: 0-20 (inclusive). Default value is 12.
Please see Zoom Levels and Tile Grid for details.

• string

Coordinates of the center point. Format: 'lon,lat'. Projection used

• EPSG:3857. Longitude range: -180 to 180. Latitude range: -85 to 85.

Note: Either center or bbox are required parameters. They aremutually exclusive.

• string

Bounding box. Projection used - EPSG:3857. Format : 'minLon, minLat,maxLon, maxLat'.

Note: Either bbox or center are requiredparameters. They are mutually exclusive. It shouldn’t be used withheight or width.

The maximum allowed ranges for Lat and Lon are defined for each zoom levelin the table at the top of this page.

• integer

Height of the resulting image in pixels. Range is 1 to 8192. Defaultis 512. It shouldn’t be used with bbox.

• integer

Width of the resulting image in pixels. Range is 1 to 8192. Default is 512. It shouldn’t be used with bbox.

• string

Language in which search results should be returned. Should be one of supported IETF language tags, case insensitive. When data in specified language is not available for a specific field, default language is used.

Please refer to Supported Languages for details.

• string

The View parameter specifies which set of geopolitically disputed content is returned via Azure Maps services, including borders and labels displayed on the map. The View parameter (also referred to as “user region parameter”) will show the correct maps for that country/region. By default, the View parameter is set to “Unified” even if you haven’t defined it in the request. It is your responsibility to determine the location of your users, and then set the View parameter correctly for that location. Alternatively, you have the option to set ‘View=Auto’, which will return the map data based on the IP address of the request. The View parameter in Azure Maps must be used in compliance with applicable laws, including those regarding mapping, of the country where maps, images and other data and third party content that you are authorized to access via Azure Maps is made available. Example: view=IN.

Please refer to Supported Views for details and to see the available Views.

• array

Pushpin style and instances. Use this parameter to optionally add pushpins to the image.The pushpin style describes the appearance of the pushpins, and the instances specifythe coordinates of the pushpins and optional labels for each pin. (Be sure to properly URL-encode values of thisparameter since it will contain reserved characters such as pipes and punctuation.)

The Azure Maps account S0 SKU only supports a single instance of the pins parameter. Other SKUsallow multiple instances of the pins parameter to specify multiple pin styles.

To render a pushpin at latitude 45°N and longitude 122°W using the default built-in pushpin style, add thequerystring parameter

pins=default -122 45

Note that the longitude comes before the latitude.After URL encoding this will look like

pins=default%7C%7C-122+45

All of the examples here show the pinsparameter without URL encoding, for clarity.

To render a pin at multiple locations, separate each location with a pipe character. For example, use

pins=default -122 45 -119.5 43.2 -121.67 47.12

The S0 Azure Maps account SKU only allows five pushpins. Other account SKUs do not have this limitation.

Style Modifiers

You can modify the appearance of the pins by adding style modifiers. These are added after the style but beforethe locations and labels. Style modifiers each have a two-letter name. These abbreviated names are used to helpreduce the length of the URL.

To change the color of the pushpin, use the 'co' style modifier and specify the color using the HTML/CSS RGB colorformat which is a six-digit hexadecimal number (the three-digit form is not supported). For example, to usea deep pink color which you would specify as #FF1493 in CSS, use

pins=default coFF1493 -122 45

Pushpin Labels

To add a label to the pins, put the label in single quotes just before the coordinates. For example, to labelthree pins with the values '1', '2', and '3', use

pins=default '1'-122 45 '2'-119.5 43.2 '3'-121.67 47.12

There is a built in pushpin style called 'none' that does not display a pushpin image. You can use this ifyou want to display labels without any pin image. For example,

pins=none 'A'-122 45 'B'-119.5 43.2

To change the color of the pushpin labels, use the 'lc' label color style modifier. For example, to use pinkpushpins with black labels, use

pins=default coFF1493 lc000000 -122 45

To change the size of the labels, use the 'ls' label size style modifier. The label size represents the approximateheight of the label text in pixels. For example, to increase the label size to 12, use

pins=default ls12 'A'-122 45 'B'-119 43

The labels are centered at the pushpin 'label anchor.' The anchor location is predefined for built-in pushpins andis at the top center of custom pushpins (see below). To override the label anchor, using the 'la' style modifierand provide X and Y pixel coordinates for the anchor. These coordinates are relative to the top left corner of thepushpin image. Positive X values move the anchor to the right, and positive Y values move the anchor down. For example,to position the label anchor 10 pixels right and 4 pixels above the top left corner of the pushpin image,use

pins=default la10 -4 'A'-122 45 'B'-119 43

Custom Pushpins

To use a custom pushpin image, use the word 'custom' as the pin style name, and then specify a URL after thelocation and label information. Use two pipe characters to indicate that you're done specifying locations and arestarting the URL. For example,

pins=custom -122 45 http://contoso.com/pushpins/red.png

After URL encoding, this would look like

pins=custom%7C%7C-122+45%7C%7Chttp%3A%2F%2Fcontoso.com%2Fpushpins%2Fred.png

By default, custom pushpin images are drawn centered at the pin coordinates. This usually isn't ideal as it obscuresthe location that you're trying to highlight. To override the anchor location of the pin image, use the 'an'style modifier. This uses the same format as the 'la' label anchor style modifier. For example, if your custompin image has the tip of the pin at the top left corner of the image, you can set the anchor to that spot byusing

pins=custom an0 0 -122 45 http://contoso.com/pushpins/red.png

Nbspmy main organizational tool devonthink pro office, a tool ive used for many years. Ive written previously about it and how i use it to find things childcare software and daycare software: childcare office pro is a bookkeeping, accounting database management tool for day care, child care, preschool, dayschool, nursery school. Tags: video, snagit, capture, produce, screen, version, system, enhanced, exactly, ram. Devonthink mac. Torrent Name AGE FILES SIZE; Magic The Gathering - The Shadow Mage (1-4)(1995) Date: 05/09/15 14:24 in: Books Comics 1762 days. Torrent Download Apple, Mac OS, Apps, Software,Games Torrents. Home; macOs Apps. Audio; Blu-ray; Books; Business; Clipboard; Code editor; Converter; Design Assets. To 256 (Boom Recorder Pro) monitors constantly for numerous hours. Related Posts. Boom Recorder Pro v8.5.0.

Note: If you use the 'co' color modifier with a custom pushpin image, the specified color will replace the RGBchannels of the pixels in the image but will leave the alpha (opacity) channel unchanged. This would usuallyonly be done with a solid-color custom image.

Getting Pushpins from Azure Maps Data Storage

For all Azure Maps account SKUs other than S0,the pushpin image and location information can be obtained from Azure Maps Data Storage. After uploading a pushpin imageor a GeoJSON document containing pin locations, the Data Storage service returns a Unique Data ID (UDID) that you can useto reference the data in the pins parameter.

To use a custom pushpin image from Azure Maps Data Storage, specify the UDID prefixed by 'udid-' as the name of thepushpin style. For example,

pins=udid-fe22c504-3a81-4fcd-adc6-a3507ce866c1 -122 45

To use the point geometry from an uploaded GeoJSON document as the pin locations, specify the UDID in the locationssection of the pins parameter. For example,

pins=default udid-29dc105a-dee7-409f-a3f9-22b066ae4713

Note thatonly point and multipoint geometry, points and multipoints from geometry collections, and point geometry from featureswill be used. Linestring and polygon geometry will be ignored. If the point comes from a feature and the featurehas a string property called 'label', the value of that property will be used as the label for the pin.

You can mix pin locations from Data Storage and pin locations specified in the pins parameter. Any of the pipe-delimitedpin locations can be a longitude and latitude or a UDID. For example,

pins=default -122 45 udid-29dc105a-dee7-409f-a3f9-22b066ae4713 -119 43

Scale, Rotation, and Opacity

You can make pushpins and their labels larger or smaller by using the 'sc' scale style modifier. This is avalue greater than zero. A value of 1 is the standard scale. Values larger than 1 will make the pins larger, andvalues smaller than 1 will make them smaller. For example, to draw the pushpins 50% larger than normal, use

pins=default sc1.5 -122 45

You can rotate pushpins and their labels by using the 'ro' rotation style modifier. This is a number of degreesof clockwise rotation. Use a negative number to rotate counter-clockwise. For example, to rotate the pushpins90 degrees clockwise and double their size, use

pins=default ro90 sc2 -122 45

You can make pushpins and their labels partially transparent by specifying the 'al' alpha style modifier.This is a number between 0 and 1 indicating the opacity of the pushpins. Zero makes them completely transparent(and not visible) and 1 makes them completely opaque (which is the default). For example, to make pushpinsand their labels only 67% opaque, use

pins=default al.67 -122 45

Style Modifier Summary

• X and Y coordinates can be anywhere within pin image or a margin around it.The margin size is the minimum of the pin width and height.

• array

Path style and locations. Use this parameter to optionally add lines, polygons or circles to the image.The path style describes the appearance of the line and fill. (Be sure to properly URL-encode values of thisparameter since it will contain reserved characters such as pipes and punctuation.)

Path parameter is supported in Azure Maps account SKU starting with S1. Multiple instances of the path parameterallow to specify multiple geometries with their styles. Number of parameters per request is limited to 10 andnumber of locations is limited to 100 per path.

To render a circle with radius 100 meters and center point at latitude 45°N and longitude 122°W using the default style, add thequerystring parameter

path=ra100 -122 45

Note that the longitude comes before the latitude.After URL encoding this will look like

path=ra100%7C%7C-122+45

All of the examples here show the path parameter without URL encoding, for clarity.

To render a line, separate each location with a pipe character. For example, use Line 5.3.0 crack.

path= -122 45 -119.5 43.2 -121.67 47.12

To render a polygon, last location must be equal to the start location. For example, use

path= -122 45 -119.5 43.2 -121.67 47.12 -122 45

Longitude and latitude values for locations of lines and polygons can be in the range from -360 to 360 to allow for rendering of geometries crossing the anti-meridian.

Style Modifiers

You can modify the appearance of the path by adding style modifiers. These are added before the locations.Style modifiers each have a two-letter name. These abbreviated names are used to help reduce the lengthof the URL.

To change the color of the outline, use the 'lc' style modifier and specify the color using the HTML/CSS RGB colorformat which is a six-digit hexadecimal number (the three-digit form is not supported). For example, to usea deep pink color which you would specify as #FF1493 in CSS, use

path=lcFF1493 -122 45 -119.5 43.2

Multiple style modifiers may be combined together to create a more complex visual style.

lc0000FF lw3 la0.60 fa0.50 -122.2 47.6 -122.2 47.7 -122.3 47.7 -122.3 47.6 -122.2 47.6

Getting Path locations from Azure Maps Data Storage

For all Azure Maps account SKUs other than S0, the path location information can be obtained from Azure Maps Data Storage.After uploading a GeoJSON document containing path locations, the Data Storage service returns a Unique Data ID (UDID) that you can useto reference the data in the path parameter.

To use the point geometry from an uploaded GeoJSON document as the path locations, specify the UDID in the locationssection of the path parameter. For example,

path= udid-29dc105a-dee7-409f-a3f9-22b066ae4713

Note the it is not allowed to mix path locations from Data Storage with locations specified in the path parameter.

Style Modifier Summary

• string

Specifies which account is intended for usage in conjunction with the Azure AD security model. It represents a unique ID for the Azure Maps account and can be retrieved from Azure Maps management plane Account API. To use Azure AD security in Azure Maps see the following articles for guidance.

• object

OK

Media Types: 'application/json', 'image/jpeg', 'image/png'

Bad request: one or more parameters were incorrectly specified or are mutually exclusive.

Media Types: 'application/json', 'image/jpeg', 'image/png'

Access denied due to invalid subscription key or invalid Azure Active Directory bearer token. Make sure to provide a valid key for an active Azure subscription and Maps resource. Otherwise, verify the WWW-Authenticate header for error code and description of the provided AAD bearer token.

Media Types: 'application/json', 'image/jpeg', 'image/png'

Headers

• WWW-Authenticate: string

Permission, capacity, or authentication issues.

Media Types: 'application/json', 'image/jpeg', 'image/png'

Not Found: the requested resource could not be found, but it may be available again in the future.

Media Types: 'application/json', 'image/jpeg', 'image/png'

An error occurred while processing the request. Please try again later.

Media Types: 'application/json', 'image/jpeg', 'image/png'

This object is returned when an error occurs in the Maps API

This response object is returned when an error occurs in the Maps API

Map style to be returned. Possible values are main and dark.

Desired format of the response. Possible value: png.

Map layer requested. If layer is set to labels or hybrid, the format should be png.

• string

The HTTP status code.

• string

If available, a human readable description of the error.

This object is returned when an error occurs in the Maps API

• string

Dark grey version of the Azure Maps main style

• string

Azure Maps main style

• string

An image in the png format. Supports zoom levels 0 through 18.

• string

Returns an image containing all map features including polygons, borders, roads and labels.

• string

Returns an image containing borders, roads, and labels, and can be overlaid on other tiles (such as satellite imagery) to produce hybrid tiles.

• string

Returns an image of just the map's label information.